|
M20 X TREME Laser Jammer
So good we have it installed in our cars |
 |
 |
 |
Rated # 1 around the World
One M20 X Treme: includes 2 (plug in) laser jammer modules (plug in), interface module, Audio and LED (plug in) alerts, Power on/off switch, leveling device (plug in). M20 X Treme is ideally suited for front laser jamming on cars and pick up trucks.
The M20 X Treme is even more effective than the #1 rated Blinder M10+. It has plug in modules using common telephone jacks. It is water and humidity resistant. It does not false alert when driving into the sun. The M20 has plug in expandability, so that if you want to go to 4 laser jammers, just buy the additional laser modules and plug them in. Competitive laser jammers are not water resistant, so if a competitive laser jammer (Escort, K40 or Bel-tronics) were to go through a car wash or rain storm, it will false alert constantly until it dries out. Competitive laser jammers also have the weakness of false alerting when driving into the morning and evening sun. Not the M20 X Treme, as it was designed to out perform the competition and jam every known laser gun under all circumstances!!!
FEATURES & BENEFITS:
- Detects all laser guns made today in Europe, USA/Canada, Australia and N.Z.
- Scans constantly for laser acquisition.
- Very small package for easy, hidden installation.
- Jams all laser guns at any distance.
- Locks on to exact frequency of laser gun for effective jamming.
- Jams constantly when laser is detected.
- Dual Laser Jammer Modules provide full frontal coverage on license plate and headlights
- THE #1 RATED LASER JAMMER/DETECTOR IN THE WORLD.
The M20 X Treme has Dual Laser Jammers to provide full frontal coverage on the plate and headlights. Other competitive, license plate mounted, single, laser jammers offer only license plate protection, but no headlight protection against laser guns.
HOW DO POLICE LASER GUNS GET YOUR SPEED?
The laser gun sends out a very narrow laser beam filled with invisible light pulses, pointed at your license plate or headlights. The laser beam reflects off your vehicle, back to the laser gun. The time required from transmission until the reflection is received is calculated by the laser gun's computer. This measurement is made about 70 times in 1/3 of a second for fast, high accuracy.
HOW DOES THE M20 X Treme WORK?
A laser jammer adds laser "noise" to the reflected signal. The Blinder? M20 X Treme correctly analyzes the incoming laser gun pulse and gets past the laser gun filters to cause the speed gun display panel to remain blank. The M20 X Treme constantly scans for laser, but jams only during the alert phase, thus providing long life for the product. When laser is detected, the Laser Warning System installed in the driver's compartment provides warning, giving the driver time to check vehicle speed. After speed is checked, the driver has can and should turn off the system to enable the officer to detect your vehicle's adjusted speed. Once past the speed trap, turn the M20 X Treme back on.
WHERE IS THE UNIT TO BE INSTALLED?
The M20 X Treme was designed to be installed behind the grille or under the bumper where it cannot be seen and is easy to mount.
HOW DOES THE BLINDER M20 X Treme COMPARE TO WINDSHIELD-MOUNTED LASER JAMMERS?
The authoritative Field Test Report by Speed Measurement Laboratories, points out that a laser jammer and laser detector must be mounted very close to the laser target area (license plates or headlights) in order to be effective. Windshield mounting places such products far outside the laser beam radius at operational distances at which laser guns are used, making them useless. If you install a laser detector or laser jammer in the windshield, the laser gun will get your speed every time. Police don't aim at the windshield, as the laser beam will go straight through. They aim at highly reflective surfaces: the headlights, front and rear license plates.